Sharp FO-D60 Operation Manual page 12

UP and DOWN arrow keys
7
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 105).
Volume setting: When a document is not in the feeder, press these keys to
change the speaker volume when the
ringer volume at any other time (page 34).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.
Number keys
8
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
9 Panel release
Press this release to open the operation panel.
STOP key
10
Press this key to cancel an operation before it is completed.
COPY/HELP/POLL key
11
Press this key to make a copy of a document (page 105). Press this key to
print out the Help List, a quick reference guide to the operation of the fax
machine. This key is also used after dialling to poll (request fax transmission
from) another machine (page 114).
12
START/MEMORY key
Press this key after dialling to begin fax transmission (page 85). Press this key
before dialling to send a fax through memory (page 95).
13
INTERCOM key
Press this key to page or locate the cordless handset.
Left and right arrow keys
14
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 90), the "REVIEW
CALLS" list (only available if you have Caller ID; page 109), and the last
number dialled (redial; page 92).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
FUNCTION key
15
Press this key followed by the arrow keys to select special functions and
settings.
10
key has been pressed, or the