Sharp CD-SW340H Operation Manual page 34

Using the Radio Data System (RDS) (continued)
CD-SW340H
TUNER
(BAND)
34
5
4
3
2
1
TIMER
CD
5
4
3
2
1
PLAYBACK (PLAY & STOP) RECORD/PLAYBACK
AUDIO
PHONES IN
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 35 - 36) from the stations
in memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the RDS PTY button on the remote control.
"SELECT" and "PTY TI" will appear alternately for about 6
seconds.
3
Within 6 seconds, press the PRESET (
select the programme type.
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 seconds,
the programme type will appear continuously.
4
Whilst the selected programme type is flashing (within 6
seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
or ) button to