Timer And Sleep Operation (Remote Control Only) - Sharp CD-MPX870 Operation Manual

CD-MPX870

Timer and sleep operation (Remote control only)

CD-MPX870W
ENGLISH
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at a
preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a ra-
dio station.
Daily timer: Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1 Set the daily timer (pages 33 - 35).
2 Set the once timer (pages 33 - 35).
1 minute or more
Daily timer
Start Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between op-
erations.
E-33
Timer playback or timer recording
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 15).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the cas-
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
lect "ONCE" or "DAILY", and press the MEMORY button.
Once timer
Start Stop
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
03/12/19
sette compartment.
or button to se-
Continued to the next page
CD-MPX870 33-42.fm