Sharp 29H-FG1F Operation Manual page 23

Picture adjustment (continued)
The following table lists the adjustment items shown in the PICTURE menu and how they change as you
press /
Selected item
VIDEO MODE
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
PICTURE NR
WHITE TEMP
• TINT can only be selected and adjusted when receiving NTSC broadcasts.
• Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or when receiving broadcasts with
relatively weak signals. In these cases, set PICTURE NR to "ON" to reduce the noise. However, when receiving
good images without noise, you can get better image quality by turning OFF this feature.
• WHITE TEMP can only be adjusted on PICTURE menu.
• If any items is adjusted, VIDEO MODE will automatically change to CUSTOM.
.
Press
DYNAMIC
To decrease contrast
For less colour intensity
For less brightness
To move tint toward red
For less sharpness
To more reddish
background
STANDARD SOFT
–
–
–
ON OFF
Press
CUSTOM
To increase contrast
For more colour intensity
+
For more brightness
+
To move tint toward green
For more sharpness
+
(see note below)
To more bluish
background
E 22