Table of Contents
Advertisement
Watching TV
TV Set
POWER
Standby indicator
Behind the door
CH
CH
COMFY
TV/VIDEO
VIEW
1
1
2
3
CHILD LOCK
4
5
6
5
SOUND MODE
7
8
9
FM RADIO
0
A
B
C
D
CH
CH
CH
CH
NORMAL
MENU
TV
• When the
Standby indicator is red, either
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the
Standby indicator is red, the TV is in Standby mode and power is still supplied to the TV. If
you will not watch TV for a while, turn off the main power by pressing
you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 (or SAV3) input channels can be selected using
.
TV/VIDEO
• Channels that have been skipped cannot be selected by
• The on-screen displays in this manual may differ from their actual appearance.
Watching a TV programme
Simple operations for watching a TV programme.
1
Turn on power.
• When the
Standby indicator is off, press
• When the
Standby indicator is red, press
control. The
Standby indicator changes to green and a picture
appears.
2
Select channel.
With
CH
• Press
CH
1 / 2 / ... / 98 / 99 / AV1 (or SAV1) / AV2 (or COMPONENT) /
AV3 (or SAV3) / 0 / 1 / 2 ...
• Press
CH
1 / 0 / AV3 (or SAV3) / AV2 (or COMPONENT) / AV1 (or SAV1) /
99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
If "5-" is indicated, press
press
5
• To select a two-digit channel,
such as 15, press
select the two-digit input. Press
, and then press
1
.
5
3
Adjust volume using
/
• The volume bar disappears
approximately five seconds
after the volume has been
adjusted.
/
CH
and channels change as shown below.
and channels change as shown below.
to select one-digit input, and then
again.
to
.
VO L UME
/
on the TV can be pressed to turn on
CH
CH
/
CH
CH
.
POWER
on the remote
.
5
– –
1 9
on the TV set. Also, if
POWER
. See 18 .
– 1
5 1
E 8
Advertisement
Table of Contents
