Table of Contents
Advertisement
Watching TV
TV Set
POWER
Standby indicator
Behind the door
CH
CH
POWER
CH
CH
• When the
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the
you will not watch TV for a while, turn off the main power by pressing
you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 (or SAV3) input channels can be selected using
.
TV/VIDEO
• Channels that have been skipped cannot be selected by
• The on-screen displays in this manual may differ from their actual appearance.
E 9
Watching a TV programme
Simple operations for watching a TV programme.
1
Turn on power.
• When the
• When the
control. The
appears.
2
Select channel.
With
• Press
1 / 2 / ... / 98 / 99 / AV1 (or SAV1) / AV2 (or COMPONENT) /
AV3 (or SAV3) / 0 / 1 / 2 ...
• Press
1 / 0 / AV3 (or SAV3) / AV2 (or COMPONENT) / AV1 (or SAV1) /
99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
If "5-" is indicated, press
press
• To select a two-digit channel,
1
such as 15, press
select the two-digit input. Press
5
1
5
3
Adjust volume using
• The volume bar disappears
approximately five seconds
after the volume has been
adjusted.
Standby indicator is red, either
Standby indicator is red, the TV is in Standby mode and power is still supplied to the TV. If
Standby indicator is off, press
Standby indicator is red, press
Standby indicator changes to green and a picture
/
CH
CH
and channels change as shown below.
CH
and channels change as shown below.
CH
again.
5
to
, and then press
.
/
.
CH
/
CH
CH
.
POWER
on the remote
POWER
.
5
to select one-digit input, and then
VO L UME
on the TV can be pressed to turn on
on the TV set. Also, if
POWER
/
. See 19 .
CH
– –
– 1
5 1
1 9
Advertisement
Table of Contents
