Sharp AR-BC260 Installation Manual page 11

I I I I Using the machine as a shared printer via a server
If the printer server in a Windows NT server environment, NetWare server environment, or other environment
is configured to share the printer (the machine), follow the steps below to install the printer driver in each client
computer.
Ask your network administrator for the server name and printer name of the machine on the network.
NOTE
For the procedure for configuring settings in the printer server, see the operating system manual or Help. The
"printer server" explained here is a computer that is connected to the machine, and "clients" are other computers
connected to the same network as the printer server.
1 Perform steps 1 through 8 of "Installing
the printer driver (Custom installation)" on
page 7.
2 Select the [Shared Printer] and click the
[Next] button.
When you are asked to select the printer
3
port to be used, click the [Add Network
Port] button.
4 Select the network printer that is shared
and click the [OK] button.
Ask your network administrator for the server
name and printer name of the machine on the
network.
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
5 In the printer port selection window, verify
the network printer that is shared and click
the [Next] button.
6 When you are asked to select the model
name, select the model that you are using
and click the [Next] button.
7 Perform step 12 through 17 of "Installing
the printer driver (custom installation)" on
page 8.
This completes the installation.
9