Selecting Menu Items; Selecting A Menu Item - Sharp 21HF2-SS Operation Manual

Selecting menu items

This TV set allows you to adjust the picture and sound, and set the channels and other features
using the On-screen display with the remote control or from the TV set. Select the desired
menu item by following the steps below and then refer to the indicated page for details.
Behind the door
CH
CH
MENU/PRESET
MENU
PICTURE
FEATURE
TIMER
CH-SETTING
CH :SELECT
:ENTER
Operating guide
• If you press MENU/PRESET
MENU screen. To display the MENU screen, press
• The procedures for setting and selecting the menu items on the following pages are described using the buttons
on the remote control. These procedures can also be performed using the corresponding buttons on the TV set.

Selecting a menu item

1
Press
MENU/PRESET
call MENU screen.
2
Press
CH
select desired menu item.
• The selected item is highlighted in
yellow.
3
Press
enter.
• The corresponding menu screen will
appear.
4
Press
MENU/PRESET
until normal screen appears.
PICTURE menu
PICTURE
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
WHITE TEMP
CH :SELECT
:ADJUST
TIMER menu
TIMER
OFF
PULL-OPEN
ON
POSITION
VOLUME
CH :SELECT
:ADJUST
on the TV set for more than two seconds, the LANGUAGE mode screen will appear instead of the
on the TV set to
/ to
CH
/ to
on the TV set
17
60
0
0
0
–
19 21
--:--
--:--
--:--
until the normal screen appears, then press the button again.
MENU/PRESET
MENU
PICTURE
FEATURE
TIMER
CH-SETTING
MENU
PICTURE
FEATURE
TIMER
CH-SETTING
FEATURE
BLUE BACK ON
CH :SELECT
:ADJUST
FEATURE menu
FEATURE
BLUE BACK OFF
:SELECT
CH
:ADJUST
CH-SETTING menu
CH-SETTING
POSITION CH27
COLOUR AUTO
SOUND B/G
SKIP OFF
FINE 168.25MHz
CH :SELECT
:ADJUST
18
16
E 12