Table of Contents
Advertisement
Watching TV
TV Set
Power indicator
POWER
Behind the door
CH
CH
TV/VIDEO
1
1
2
3
4
5
6
5
7
8
9
0
CH
CH
CH
CH
FEATURE
TIMER
PICTURE
CH-SET
NORMAL
TV
• When the power indicator lights up dimly, either
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator lights up dimly, the TV is in Standby mode and power is still supplied to the
TV. If you will not watch TV for a while, turn off the main power by pressing
if you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 and AV2 input channels cannot be selected using
Use
TV/VIDEO
• Channels that have been skipped cannot be selected by
• The on-screen displays in this manual may differ from their actual appearance.
Watching a TV programme
Simple operations for watching a TV programme
1
Turn on power.
• When the power indicator is off, press
• When the power indicator lights up dimly, press
control. The power indicator changes to bright and a picture appears.
2
Select channel.
With
CH
• Press
1 / 2 / ... / 98 / 99 / AV1 / AV2 / 0 / 1 / 2 ...
• Press
1 / 0 / AV2 / AV1 / 99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
If "5-" is indicated, press
press
• To select a two-digit channel, such as 15, press
the two-digit input. Press
3
Adjust volume using
• The number of oval blocks " "
indicates the volume level.
The volume bar disappears
approximately three seconds after
the volume has been adjusted.
to select these channel.
/
CH
and channels change as shown below.
CH
and channels change as shown below.
CH
again.
5
1
.
/
CH
CH
CH
CH
.
POWER
on the remote
.
5
to select one-digit input, and then
, and then press
5
/
VOLUME
on the TV can be pressed to turn on
on the TV set. Also,
POWER
/
on the remote control.
CH
16
/
. See
.
CH
to select
.
--
1-
15
SECAM
D/K
10
E 8
Advertisement
Table of Contents
