Watching Tv; Watching A Tv Programme - Sharp 21B-FX1 Operation Manual

Watching TV

TV Set
Power indicator
TV/VIDEO
1 2 3
4 5 6
7 8 9
0
CH
CH
CH
CH
MENU
SURROUND NORMAL
LANGUAGE
TV
• When the power indicator is red, either
power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator is red, the TV is in Standby mode and power is still supplied to the TV. If you
will not watch TV for a while, turn off the main power by pressing
not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 and AV2 input channels cannot be selected using
Use
TV/VIDEO
• Channels that have been skipped cannot be selected. See
• The on-screen displays in this manual may differ from their actual appearance.
E 7

Watching a TV programme

Simple operations for watching a TV programme
1
Turn on power.
• When the power indicator is off, press
• When the power indicator is red, press
control. The power indicator changes to green and a picture appears.
2
Select channel.
CH
With
CH
• Press
1 / 2 / ... / 98 / 99 / AV1 / AV2 / 0 / 1 / 2 ...
• Press
1 / 0 / AV2 / AV1 / 99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
1
• To select a one-digit channel, such as 5, press
If "5-" is indicated, press
press
5
• To select a two-digit channel, such as 15, press
the two-digit input. Press
3
Adjust volume using
• The number of oval blocks " " and
" " indicates the volume level.
The volume bar disappears
approximately three seconds after
the volume has been adjusted.
to select these channel.
/
CH CH
and channels change as shown below.
CH
and channels change as shown below.
CH
again.
5
1
.
/ on the TV can be pressed to turn on the
CH CH
CH
15 .
.
on the remote
.
5
to select one-digit input, and then
to select
, and then press
5
--
/
VOLUME
on the TV set. Also, if you will
/ on the remote control.
CH
.
1-
15
PAL
B/G
10