Advanced Operation Of Playback; Repeated Playback; Program Playback - Sharp DV-740H Operation Manual

ADVANCED OPERATION OF PLAYBACK

<

REPEATED Playback

l TITLE/CHAPTER Repeat
When the
REPEAT
playback is triggered and the OSD message is
changed in cycles of "CHAPTER REPEAT ON",
"TITLE REPEAT ON", and "REPEAT OFF."
?
CHAPTER REPEAT
Enables the repeated playback of a chapter for a DVD
disc or track for a Audio CD disc or a VCD disc.
?
TITLE REPEAT
Enables the repeated playback of a title for a DVD disc
or a disc for a Audio CD disc or a VCD disc.
?
REPEAT OFF
Resumes normal play.
CHAPTER REPEAT ON
l A-B Repeat
You are able to perform a repeated playback between
any two points of a track or a chapter.
1. Press the
A-B REPEAT
beginning point (A). The OSD message "A TO B SET
A " will be shown on the right lower screen corner.
2. Press the
A-B REPEAT
(B). The OSD message "A TO B SET B " will be shown.
In the meantime, the repeated playback begins
between the two points, A and B.
3. Pressing the
A-B REPEAT
play. The OSD message "A TO B CANCELLED" will
be shown.
SET A
A TO B SET A
button is pressed, the repeated
TITLE REPEAT ON
button during playback to set the
button again to set the end point
button again resumes normal
SET B
A TO B SET B
<

PROGRAM Playback

Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
l Track Program
1. Press the
PROGRAM
program playback during STOP status.
PROGRAM P00: 00
2. Use the numbers on the remote control to begin
programming. Press the corresponding track number
in the same sequence as your desired playback order.
For example:
To program tracks 2, 4, 6 (in the same order), simply
press key digits
Set track 2 as first sequence
PROGRAM P01: 02
?
A number larger than 10 must be keyed by using
additionally. For example, "22" is keyed in by pressing
twice and then
+10
NOTES:
The maximum program capability is 99 tracks.
i
l Start/Cancel the Program Playback
?
Press the
PLAY
the order that you programmed it.
?
Press the
STOP
to reset program order, press
PROGRAM
again to cancel the program function.
?
During the program playback, the
the 9 button can be used to advance to the next
SKIP
programmed track or go back to the previous
programmed track.
- 26 -
button to program the tracks for
, digit , digit sequentially.
2 4 6
Set track 4 as second sequence
PROGRAM P02: 04
once.
2
button to start the program playback in
button to stop playback, press
: button and
SKIP
+10
PROGRAM