Enhancing Your System; 6. Video/Auxiliary (Audio Signal) Input Sockets - Sharp XL-UH220H Operation Manual

Enhancing your system

XL-UH220H
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
VIDEO/AUX IN
RIGHT LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT LEFT
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.
VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the "USB" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
36
ANTENNA
FM GND AM
75 OHMS
VIDEO/AUX IN
RIGHT LEFT
Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX/USB (USB/AUX) button.
4
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects
automatically. Adjust the volume using the VOLUME control.
the speakers