Rosen Aviation 0500-101 Technical Manual

Digital wireless headphone system

Advertisement

Quick Links

ELECTRONIC REVISION
CONTROLLED
Document Number 103517 Rev B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0500-101 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rosen Aviation 0500-101

  • Page 1 ELECTRONIC REVISION CONTROLLED Document Number 103517 Rev B...
  • Page 2 © 2009 by Rosen Aviation, LLC All Rights Reserved The information contained herein is proprietary to Rosen Aviation, LLC. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written authorization from Rosen Aviation, LLC, except as allowed under copyright laws.
  • Page 3: Table Of Contents

    Rosen Aviation Digital Wireless Headphone System Contents 1. INTRODUCTION .........................4 1.1. Unpacking ........................4 2. CONNECTING THE TRANSMITTER .................4 3. WIRELESS TRANSMITTER CONNECTOR ...............5 4. PLACING THE TRANSMITTER ..................6 5. INSERTING THE BATTERIES INTO THE HEADPHONES ..........7 6. OPERATING THE HEADPHONES ..................8 7.
  • Page 4: Introduction

    Rosen Aviation Digital Wireless Headphone System 1. INTRODUCTION The Digital Wireless Headphone System consists of a 5.8 GHz transmitter and 5.8 GHz headphones. The transmitter features three audio inputs and a pilot microphone input. The pilot microphone input will override the other inputs when active. The unit is designed to integrate into any entertainment system with analog audio capability.
  • Page 5: Wireless Transmitter Connector

    Rosen Aviation Digital Wireless Headphone System 3. WIRELESS TRANSMITTER CONNECTOR Table 1 Wireless Transmitter J1 Connector Pin # Signal Comment 28 Volts Power Audio #1 Left Signal Input Audio #1 Right Signal Input Audio #2 Left Signal Input Audio #2 Right Signal...
  • Page 6: Placing The Transmitter

    Rosen Aviation Digital Wireless Headphone System 4. PLACING THE TRANSMITTER The wall-mounted transmitter must be mounted with the J1 connector pointing toward the ceiling of the aircraft cabin. It can be placed behind a bulkhead or other wall, as long as the bulkhead or wall is made of composite or wood material.
  • Page 7: Inserting The Batteries Into The Headphones

    Rosen Aviation Digital Wireless Headphone System 5. INSERTING THE BATTERIES INTO THE HEADPHONES There are two battery compartments, one in each earpiece. To open the battery compartment, press the center of outer edge of either earpiece firmly – the battery compartment lid will pop open.
  • Page 8: Operating The Headphones

    7. TECHNICAL REFERENCES AND SUPPORT 7.1. Troubleshooting If the transmitter or headphones do not function properly, refer to the following troubleshooting tips for symptoms and possible solutions before contacting Rosen Aviation field support. Table 2 Troubleshooting tips and solutions Problem...
  • Page 9: Do-160E Qualifications

    Rosen Aviation Digital Wireless Headphone System 7.2. DO-160E Qualifications Table 3 DO-160E qualifications Transmitter Headphones DO-160E Description DO-160E DO-160E Section Category Category Temperature and Altitude Temperature Variation Humidity Operational Shocks & Crash Safety Vibration S, Curve B Magnetic Effect 15.0 Power Input 16.0...
  • Page 10: Regulatory Approvals

    Rosen Aviation Digital Wireless Headphone System Table 5 Wireless transmitter specifications Audio Transmission Method Digital Transmitter Frequency 5.8 GHz Signal-to-Noise ratio (A-weighted) Min. 90 dB Dynamic Range Typ. 100 dB Channel Separation Min. 65 dB Harmonic Distortion Max. -55 dB...

This manual is also suitable for:

0700-010

Table of Contents