Toshiba Satellite Pro M205 User Manual page 44

44
If something goes wrong
If you are using an AC adaptor, verify that the computer is receiving
power from the external power source by looking at the AC power
light. If the indicator is glowing, the computer is connected to a live
external power source.
The computer starts but when you press a key nothing
happens.
Verify that the active program accepts text input. Try clicking your
mouse on an area where you can type text and try typing again.
Your computer may be in Standby mode and have a software or
resource conflict. When this happens turning the power on returns
you to the problem instead of restarting the system. To clear the
condition, press
Clearing the condition may get the computer running, but it will not
solve a resource conflict. Read the documentation that came with
the conflicting device and "Resolving a hardware conflict" in your
electronic user's guide.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numlock light or cursor control
mode light is on, press
light, or
If the problem occurs when both the keypad overlays are off, make
sure the software you are using is not remapping the keyboard.
Refer to the software documentation and check that the program
does not assign different meanings to any of the keys.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by pressing
and
Fn F1
any key, type the password and press
registered, press any key. The screen reactivates and allows you to
continue working.
If you are using the built-in screen, make sure the display priority is
not set for an external monitor. To do this, press
simultaneously (once). If this does not correct the problem, press
and F5 simultaneously again to return the display priority to its
previous setting.
Ctrl , Alt , and
Fn
+ to turn off the numlock light.
Fn F11
simultaneously. If you have registered a password, press
HINT: Holding the Fn key and pressing the F5 key several times will
advance you through the display options.
Del simultaneously.
+ to turn off the cursor control mode
F10
. If no password is
Enter
Fn and F5
Fn