Table of Contents
Advertisement
2
Knowing the Parts
Right Side
Refer to the diagram below to identify the components on this side of the Notebook PC.
ExpressCard Slot
1
One 26pin Express card slot is available to support one ExpressCard/34mm or one
ExpressCard/54mm expansion card. This new interface is faster by using a serial bus
supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC
card slot. (Not compatible with previous PCMCIA cards.)
IEEE1394 Port
2
IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-
plugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400
Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in
high-end digital equipment and should be marked "DV" for Digital Video port.
USB Port (2.0/1.1)
3
2.0
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such
as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected
in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many
devices to run simultaneously on a single computer, with some peripherals acting as addi-
tional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals
can be connected or disconnected without restarting the computer.
TV-Out Port
4
The TV-Out port is an S-Video connector that allows routing the Notebook
PC's display to a television or video projection device. You can choose between
simultaneously or single display. Use an S-Video cable (not provided) for high
quality displays or use the provided RCA to S-Video adapter for standard video
devices. This port supports both NTSC and PAL formats.
Display (Monitor) Output
5
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a
monitor or projector to allow viewing on a larger external display.
16
2
4
1
3
5
6
7
8
Advertisement
Table of Contents
