Zenith SYSTEM 3 Z36X31 Operating Manual & Warranty page 2

. ,. SAFETY WARNINGS
WARNING
WARNING: ,
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE, COVER OR BACK. NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to _dert the user
to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be o1"
sufficient magnitude to constitute a risk of electric shock to persons.
J
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
SAFETY TIPS
Refer to the "Important Safety Instructions" section of this
operating guide for important safety considerations.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE TV SYSTEM
INSTALLER
This reminder is provided to call the cable TV system
installer's attention to Article 820-40 of the National
Electrical Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
POWER-CORD POLARIZATION
This product is equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other).
As a safety feature,_this plug will fit into the power outlet
only one way. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
Caution
To prevent electric shock, match wide blade of plug to
wide slot; fully insert.
REGULA TORY INFORMATION
This equipment has been testezl and found to comply with
the limits for a Class B digital device, pursuarLt to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equip_laent gener_ttes, uses, and
can radiate radio frequency energ_ and, if not installed and
used in accordance with the instru,ztions, may cau,;e
harmful interference to radio conununications. However,
there is no guarantee that interference will not occur in a
particular installation. If this _luipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, l_heuser is
encouraged to try to correct the inlerference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment it_to an outlet on a circuit
different from that to which the receiver is connected.
• Consuh the dealer oc an experienced radio/TV
technician.
CAUTION: Do not attempt to modify this product in any
way without written authorizati:on from Zenith Electronics
Corporation. Unauthorized modification could void the
user's authority to operate this product.
Attention
Pour _viter les choc8 _lectriques, inixoduire la lame la plus
large de la fiche dans la borne correspondante de la prise et
pousser jusqu'au fond.
, Copyright © Zenith Electronics Corporation 1997
zTvw_,u_ ii