1130 System Board - Lenovo G575 Hardware Maintenance Manual

1130 System board

Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1020 Dummy card" on page 35
• "1030 Optical drive" on page 36
• "1040 Hard disk drive (HDD)/Memory/CPU (Central processing unit)/Mini
PCI ExpressCard slot compartment cover " on page 37
• "1050 Hard disk drive " on page 38
• "1060 DIMM" on page 40
• "1070 Fan assembly and Heat Sink assembly" on page 41
• "1090 PCI Express Mini Card for wireless LAN" on page 45
• "1100 Keyboard" on page 47
• "1110 Keyboard bezel" on page 49
Figure 13. Removal steps of system board
Unplug the LCD connector and detach two connectors in the direction shown by
arrows .
1
When installing: Make sure that the connectors are attached firmly.
Lenovo G470/G475/G570/G575
1
1
53