Operation; Product View And Parts Identification; Select An Extension Cord; Attach The Extension Cord To The Trimmer - Craftsman WEEDWACKER 358.799130 Operator's Manual

KNOW YOUR
TRIMMER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the loca-
tion of the various controls and adjustments. Save this manual for future refer-
ence.
Assist Handle
Motor
Recessed Trigger Switch Housing
Plug J
Cord Retainer
Air Vents
Edge
f Guide
Debris Shield
RECESSED PLUG
The recessed plug is where you attach
your extension cord to the unit.
TRIGGER SWITCH
The trigger switch is used to turn on
the unit. Squeeze the trigger switch to
operate the unit.
LINE LIMITER
The line limiter cuts the cutting line to
the proper cutting length.
SemFautomatic
Head with .065" line.
Line Limiter
ASSIST HANDLE
The assist handle is used to help hold
and guide the unit.
SEMI-AUTOMATIC HEAD
The semi-automatic head holds the
cutting line and rotates during opera-
tion.
EDGE GUIDE
The edge guide protects the unit from
contacting the ground during edging.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. 18 Gauge
50 Ft. 16 Gauge
100 Ft. 16 Gauge
Extension cords are available for this
unit.
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook. Insure
the plug and cord are firmly and fully
engaged.