Menu Operation - Mitsubishi LVP-X200A User Manual

Menu operation

Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Brightness adjustment
1. Press the MENU button.
PinP/
SIGNAL PICTURE
EXPAND
2. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
PICTURE.
PinP/
SIGNAL PICTURE
EXPAND
3. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control).
CONTRAST BRIGHTNESS
0 0
USER USER
PinP/
SIGNAL PICTURE
EXPAND AUTO PLAY
4. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
BRIGHTNESS.
CONTRAST BRIGHTNESS
0 0
USER USER
PinP/
SIGNAL PICTURE
EXPAND AUTO PLAY
5. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to adjust
brightness.
CONTRAST BRIGHTNESS
0 15
USER USER
PinP/
SIGNAL PICTURE
EXPAND AUTO PLAY
If you wish to change the color balance, follow
the steps below.
6. Press the or buttons on the control panel (or
$ or % buttons on the remote control) to select
USER and press the ENTER button.
BRIGHTNESS
R G
15 15
18
PC CARD
AUDIO
AUTO PLAY
PC CARD
AUDIO
AUTO PLAY
GAMMA
TINT COLOR
CORRECTION
0 0
USER
PC CARD
AUDIO INSTALLATION
GAMMA
TINT COLOR
CORRECTION
0 0
USER
PC CARD
AUDIO INSTALLATION
GAMMA
TINT COLOR
CORRECTION
0 0
USER
PC CARD
AUDIO INSTALLATION
B
15
7. Press the
$ or % buttons on the remote control) to select the
desired color R, G or B.
8. Press the ª or º buttons on the control panel (or
{ or } buttons on the remote control) to adjust
brightness of the desired color.
OPTION
9. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, simultaneously
press the MENU and POWER button.
• To switch back to the factory preset of each menu,
select RESET and press the ENTER button.
• When selecting RESET, the buttons cannot be oper-
ated for 2 to 18 seconds.
OPTION
OPTION
or buttons on the control panel (or
BRIGHTNESS
R G B
15 15 15
BRIGHTNESS
R G B
15 -15 15