Table of Contents
Advertisement
SERVICE
A
D ADJUSTMENTS
CAUTION:
BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
•
Depress
clutch/brake
pedal fully and set parking brake.
=
Place gearshift
lever in neutral (N) position.
=
Place attachment
clutch
in "DISENGAGED"
position.
°
Turn ignition key "OFF" and remove key.
°
Make sure the blades and all moving parts have completely
stopped.
°
Disconnectsparkplugwirefromsparkplugandplacewirewhereitcannotcomeincontactwith
plug.
TRACTOR
TO REMOVE
MOWER
(See Fig.
19)
Mower will be easier to remove from the right side of tractor.
,
Place attachment clutch in "DISENGAGED" position.
,
Move attachment lift lever forward to lower mower to its
lowest position.
•
Roll belt off engine pulley.
•
Disconnect clutch rod from clutch lever by removing
retainer spring.
•
Disconnect
anti-sway
bar from chassis bracket by
removing retainer spring.
,
Disconnect suspension arms from rear deck brackets
by removing retainer springs.
,
Disconnect front links from deck by removing retainer
springs.
,
Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
IMPORTANT:
IF AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED
TO THE
TRACTOR,
REMOVE THE FRONT LINKS.
TO INSTALL
MOWER
(See
Fig.
19)
•
Raise attachment lift lever to its highest position.
,
Slide mower under tractor with discharge guard to right
side of tractor.
,
Lower lift lever to its lowest position.
•
Install mower in reverse order of removal instructions.
CLUTCH
"OH LEVER
SUSPENSION
SPRING
ENGINE
PULLEY
RETAINER
SPRINGS
BOTH SIDES
RETAINER
SPRING
ANTI-SWAY
BAR
f
RETAINER
SPRINGS
(BOTH
SIDES)
FIG. 19
2O
Advertisement
Table of Contents
