Button Functions - X10 IconRemote IR18A Owner's Manual

Button Functions

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Note: REC must be pressed twice to record from your
VCR. For some VCR brands, you might need to press
REC once, then press it again for 3 seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. These differences depend upon the brand
and model of your product. Also, this remote can only
operate features that exist on your product.
4
Button Functions (cont.)
1. TV, VCR, DVD, CBL, AUX: Indicates which
equipment is operating; press SELECT for mode
(from AUX to TV, TV to VCR, etc.).
25.
2. FAVORITES BUTTONS: Allow you to choose your
favorite channels. (Key feature & benefit!)
24.
3. FAVORITES ICONS: Display icons of your favorite
channels. (Key feature & benefit!)
4. GUIDE: Displays on-screen program or channel
guides. Displays DVD Title Menu screen.
23.
5. MENU: Brings up the device Menu screen (if
available) - use with UP, DOWN, LEFT, and RIGHT
navigation buttons.
6. UP, DOWN, LEFT, RIGHT: Navigation buttons.
22.
7. VOLUME UP/DOWN: Changes the volume level of
the product, normally the TV.
21.
8. MUTE: Turns off the TV sound while the picture
remains.
20.
9. CC (SUBTITLE): TV Closed Caption (if your TV
has this feature) or DVD Subtitle toggle.
10. LAST (REPEAT): Returns to the previously
19.
selected channel or DVD repeat toggle.
11. +100: Used for channels greater than 100. (-) used
18.
for digital channels like 2-3.
12. SCAN- (REVERSE): Reverses through a chapter or
title.
17.
13. REC, STOP, PAUSE, PLAY: VCR controls.
14. SCAN+ (FAST FORWARD): Fast-forwards through
16.
a chapter or title.
15. ENT: Used after direct channel number entry to
change to the selected channel immediately.
16. NUMBERS: Enter numbers for direct channel
15.
selection. Some products require ENT to be pressed
after channel selection.
17. SETUP: Initializes setup of remote and devices.
18. LEARN: Used to setup learning functions.
19. OK: Selects menu items for the device you are
14.
controlling.
20. CHANNEL UP/DOWN: Changes the channels.
CHAPTER +/-: controls DVD/CD track selection.
Note: VCR buttons also control DVD when in DVD
mode.
21. EXIT: Exits on-screen menus/returns to previous
on-screen selection.
22. INFO: Displays/selects on-screen channel
information, etc.
23. INPUT: For some TVs, press repeatedly to select
from available viewing sources (antenna, cable box,
VCR, etc.).
24. SELECT: For TV, VCR, DVD, Cable (CBL), or
Auxiliary device.
25. POWER: Turns device on or off.
5