Table of Contents
Advertisement
9. After you restart your Macintosh, you need to select
your printer in the Chooser. Open the Chooser. If
you're connected to the Macintosh printer port or to
a PowerBook with one port, turn off AppleTalk
10. Click the
port you're using. Turn on background printing, if
you want to use it. Then close the Chooser.
11. Continue with section 3, "Print an image" on the
back of this card.
Install Your Bonus Software and
Electronic Manual
Once you've restarted your system, you can install the rest
of the software on your CD-ROM. (This section does not
apply to Windows 3.1 or Macintosh.)
1. Make sure the printer software CD-ROM is in your
drive.
Start
2. Click
D
is your CD-ROM drive letter). Then click
3. After a moment, you see the Installer Main Menu. To
install the Guided Printing Exercise/Bonus Software
or your electronic manual, just click the button for
your selection. Then follow the on-screen
instructions. Click
To view your electronic manual, you must install
Adobe Acrobat
don't already have it. The installer automatically
installs it for you. Once you've viewed the
manual, you can copy it to your hard disk using
the Copy Printer Manual to Hard Drive option.
4. After you finish installing software, you're ready to
print a color image! If the installer prompts you to
restart, go ahead and restart your system. Then see
section 3, "Print an image" , to get started.
If you want to verify your USB software
installation, see "Troubleshooting" in your
Printer Basics book.
SC 900
icon, then click the icon for the
Run
, select
EXIT
Reader on your system, if you
®
, and type
D:\EPSON
when you're done.
®
.
(where
OK
.
Advertisement
Table of Contents
