Zenith A27B33 Operating Manual & Warranty page 35

I ,RooR,....o .E.OT I P,GE , ,
The deviceyou want to programshoutd
be on.
On the chart on page 39/40, find
the type of deviceyou're
programming, a nd then find the brand
name. Make a note of the three-digit
code,you'll need it soon.
Pressand hold the PRGkey. It's recessed
soit doesn't get pushedaccidentatty.
Use a sma[| object. Whenthe indicator
[ight'turns on, you can releasethe key.
Pushthe key namewith the type of
deviceyou're programming(VCR,CABLE,
AUX, TV).
Usingthe numberpad, enter the three
digit codeyou found on page 39/40.
PressENTER to savethe code. (The indi-
cator tight wit[ flash 3 times, then turn
off to indicate the code is valid.)
Aim the remoteat the deviceand push
the POWER key. It shouldturn off. If
not, try the other codes tisted and con-
tinue from step three.
Note: To reset remote to factory set-
tings, enter 9-1-1, in step 5.
Programming yourZenith remote
wiUoUowyou to useone remote
to workup to 7 different things.
Not all deviceswill workwith your
Zenith remotecontrol.
0
i
\
Program your
remoteto
workwith a
vast range of
brandname
devices.
J
PROGRAMMING
PRG
DEVICE
Procedure to set up remote to operate other equipment.
Programming key.
Infra-red remote controllabteelectronicaccessonj.
3374-0