Random Play; Repeating Tracks; Tray Lock Function - JVC MX-KC4 Instructions Manual

Using the CD Player
Random Play
The tracks of the selected CD will play in no special order when
you use this mode.
1
In Stop mode, set the CD Player in Random
Play mode.
On the Unit
Press the RANDOM button to light the "RNDM" and "l DISC"
indicator.
At the same time, "RANDOM" appears on the display.
On the Remote Control
Press tile PROGRAM/RANDOM bntton until tile "RANDOM"
appears on the display.
The "RNDM" and "1 DISC" indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM _" RANDOM _" Normal display (Normal Play) _"
(back to the beginning)
2
Press the CD I_/11 button.
The tracks on all the CDs are played in random order.
To stop playing,
press the • button. The Random mode is can-
celed and the "RNDM" and "1 DISC" indicator goes off.
To skip a track during playback, press the I_1_1 button to
jump to the next track in the random sequence.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
REPEAT ALL-" REPEAT 1DISC-" REPEAT 1_" Blank display
(back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
REPEAT1DISC:Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1 :
Repeats one track.
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEAT _'* Blank display
It repeats all the tracks in the program.
To stop playing, press the • button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the Repeat indicator goes off.
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close A button on the Unit is pressed.
Locking the Tray
1[ Turn on the System and enter CD mode.
2 While pressing down the • button, press the
CD Open/Close A button on the Unit.
"LOCKED" appears on tile display.
CD__.
I_ I_l I_ 17_ )kl
• If you try to open the tray by pressing the CD Open/Close
button, "LOCKED" appears on the display to let you know that
the tray has been locked.
Unlocking the Tray
Repeat abo,_e steps 1 and 2.
"UNLOCKED" appears on the display.
+_ I Ib iI I--II-- I_ I-- TI
I_11 q I_ I_1 I_ I% I_ _1
Now, you can use the tray normally.
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
15