Do you have a question about the PlaySafe Dizzy Quad Merry-Go-Round 22-PS044T and is the answer not in the manual?
Questions and answers
Summary of Contents for PlaySafe PlaySafe Dizzy Quad Merry-Go-Round 22-PS044T
Page 1
DAMAGE TO, OR FAILURE OF THE PRODUCT OR ANY OTHER LOSSES TO ACCIDENT, ABUSE, MISUSE, ALTERATION, NEGLECT, NORMAL WEAR TEAR, RUST, IMPROPER ASSEMBLY, IMPROPER FIT, IMPROPER MAINTENANCE OR USE OF UNAUTHORIZED REPLACEMENT PARTS DESIGNED THE PRODUCT. .v)2008 Pacific Cycle, Inc.
Page 2
To make claim under warranty, notification of such defect must be given to Pacific Cycle, Inc. By calling the phone number below, you will be instructed on how the product or part needing replacement should be shipped postpaid to Pacific Cycle, Inc.
Page 3
6110. Anchoring devices must be placed below the level of the protective playing surface to prevent tripping or injury resulting from a fall. The Playsafe Anchor Kit will include further instructions to properly anchor the equipment. ._2008 Pacific Cycle, Inc.
Page 4
PROPER This equipment is designed for use bv children ages 3 to 10 under adult supervision. The maximum number of users this unit is intended for is 4 children with a maximum weight of 105 lbs each. The maximum fall height for this equipment 60".
Page 5
CARE MAINTENANCE • Check all nuts and bolts twice monthly during the usage season for tighmess and tighten as required. It is particularly important that all nuts and bolts are checked prior to the first use each season. • For extended use, remove plastic parts and take indoors when the telnperamre drops below 32 ° F. •...
Page 6
PRE-ASSEMBLED HARDWARE For easier assembly, Playsafe has pre-asselnbled some of the parts for you. Most of the screws and bolts should already be in place. If relnoval of this hardware is required for certain assembly steps, it should be replaced in its original position. Hardware shown in the assembly steps are actual size.
Page 7
Part Ref. #: PSHW12 Attach the Leg/Top Bar assembly to the Leg/Top Bar fitting. Align the holes and re-insert the hardware, making sure that the lock washers are on the underside of the tube. Repeat process for the other two Leg/Top Bar assemblies.
Need help?
Do you have a question about the PlaySafe Dizzy Quad Merry-Go-Round 22-PS044T and is the answer not in the manual?
Questions and answers