Id Scan Function; Search Function - Technics SL-PD967 Operating Instructions Manual

This function is convenient to use when searching for a desired
track.
The function will search from the beginning of the track for a loud
section, and will play 10 seconds of the track centering around
that point.
The order of scanning is the same as for play mode.
lOgAN _
....... I'1"1
r_r
You can search rapidly forward or backward on the disc for
specific sections.
J
I I
•<_1 SEARCH I_D-
I I"
,oscA. Press ID SCAN.
[_ ID scan will start.
I I
f (1).._,. l: i,-,
, ,, ,,:,)? I I
I m_ I -,
" OISC MIIN SEC
Illuminates
<_1 SEARCH _ [In the play or pause mode]
I I
I Press and hold <1<1 or I_1_.
_1_1: You can search backward. I_1_: You can search forward.
Release the button when you reach the
desired point.
The changer will return to the previous mode
(play or pause).
When the desired track has been found:
[_ Press I_.
The changer will play the track from the begin-
ning.
In sequential play mode:
You can search forward over discs and backward within the cur-
rent disc.
In other play modes:
You can search forward or backward only within the current
track.
To cancel ID scan
,OSCA_ Press ID SCAN while this function
L_ is in operation.
The "ID" indicator will go out.
The changer will continue to play from track being played.
For your reference:
The search function will begin slowly, and then, if the button is
held pressed for longer than 3 seconds, it will change to high-
speed search.
In the play mode, the sound level decreases by 12 dB (1/4).
13