Table of Contents
Advertisement
Windows 95 Guest
The following steps provide examples of what you may see as your guest operating
system recognizes the new virtual hardware. The specific steps may vary, depending
on the configuration of the virtual machine.
1. Power on the virtual machine and let it update the CMOS.
2. Windows detects new devices and automatically installs the drivers. Restart the
guest operating system after this process is complete.
3. When Windows restarts, it detects more new devices.
4. Windows asks for the file lpt.vxd. Enter the location
C:\Windows\System, then click OK.
5. Windows detects a PCI standard host bridge and other devices. Click OK to
dismiss these messages. You do not need to install these drivers.
6. Click Finish.
7. Install the new version of VMware Tools. For details, see
in the VMware GSX Server Virtual Machine Guide.
8. Shut down the Windows guest and power off the virtual machine.
9. Choose VM > Upgrade Virtual Hardware.
10. A message cautions you that the operation is irreversible and recommends that
you back up the virtual disks before proceeding. To continue, click Yes.
11. A message describes what is about to happen. Click OK to continue.
12. Windows detects a PCI Multimedia Audio device. Click Cancel.
13. Windows detects a PCI Ethernet adapter, then the AMD Ethernet adapter.
Windows automatically installs the driver.
14. To install the sound adapter, follow the directions in
Windows 9x and Windows NT Guest Operating Systems
Server Virtual Machine Guide.
15. If you have serial ports configured in the virtual machine, go to the Windows
Device Manager and uninstall all the COM ports listed there.
16. Restart the virtual machine.
17. Windows detects the COM ports and installs them properly.
C H A P T E R 3 Upgrading VMware GSX Server
Installing VMware Tools
Installing Sound Drivers in
in the VMware GSX
101
Advertisement
Table of Contents
