Table of Contents
Advertisement
Quick Links
Club 8800
Quick Reference Setup Guide
This quick reference guide is provided to help you set up your CLUB-
8800 system for the first time. It contains instructions on setting up
the products that are included in the CLUB-8800. If you are connect-
ing any additional gear that is not included in the CLUB-8800, refer to
the appropriate manuals for detailed instructions.
Gathering Package Contents
The first step to putting together your new CLUB system is unpacking all of the necessary equipment. Remember to keep
your manuals nearby when setting up, as you may need to reference them. The products listed below are included in the
CLUB-8800 system:
CDG-9000PRO
• (2) RCA cables
• (2) Control interface connector
wires
• (1) Instruction manual
KJM-7800PRO
• (1) Instruction manual
VP-2100PRO
• (1) Instruction manual
Mounting components into the CLUB-8800
Follow these basic guidelines when mounting:
• Always screw in the mounting screws using an
"X" formation.
• If possible, to keep the products cooler, leave some
space in between the components in the rack.
VX-15 Speakers
• (4) VX-15 speakers
UHF-5800
• (1) 3 ft. male/male ¼" cable
VSP-M1 Multi-Effect Digital Signal
Processor/Mixer
• (1) Instruction manual
SS-88 Speaker Stand
• (4) SS-88 speaker stands
Road Case
• (1) CLUB-8 road case
• (1) Rolling cart
• (2) MK 38PRO microphones
• (1) Gooseneck DJ light
• (1) Double RCA to ¼" cable (3'3")
• Rack-mounting screws
Below is one way to configure your CLUB-8800:
On the web at www.vocopro.com
or call toll free 1-800-678-5348
CDG 9000 PRO CONTROLLER
VSP M1
KJ 7800 PRO
UHF 5800
CDG 9000 PRO PLAYER
VP 2100
Advertisement
Table of Contents
Related Manuals for VocoPro Club 8800
Summary of Contents for VocoPro Club 8800
- Page 1 • If possible, to keep the products cooler, leave some space in between the components in the rack. CDG 9000 PRO CONTROLLER VSP M1 KJ 7800 PRO UHF 5800 CDG 9000 PRO PLAYER VP 2100 On the web at www.vocopro.com or call toll free 1-800-678-5348...
-
Page 2: Connecting Power
Setting up the speakers and speaker stands Setup each SS-88 speaker stand by extending the support lefts to a position that is stable and tighten the tension mechanism firmly. Place a VX-15 speaker on top of the SS-88 so that the shaft of the SS-88 fits flush into the mounting cavity on the bottom of the VX-15. - Page 3 CDG-9000PRO player unit to KJ-7800PRO You have the option of either connecting each deck of the CDG-9000PRO separately (Fig. 1) or together through a single SWITCHED output (Fig. 2). Separately through individual deck outputs (Fig.1) Using RCA cables: 1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000PRO to the AV1 and AV2 inputs on the rear panel of the KJ-7800PRO KJ 7800 remote...
- Page 4 VP-2100PRO to VX-15 speakers VP 2100 Speakers 1 and 2 -BRIDGE+ ���� ���� Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m) ������ ���� �� ������� ������� cable (included): ���� ���� ��� ������ ������� �������� 1. Connect the SPEAKON style end to CH.1 on the rear panel of ����������...
Need help?
Do you have a question about the Club 8800 and is the answer not in the manual?
Questions and answers