Printing With Macintosh Os X - Epson Stylus Photo R200 Printer Basics Manual

Printing With Macintosh OS X

If you're using a Mac OS X-compatible printing application, follow the steps
below to print a document. (If you're using an application that's compatible only
with Macintosh Classic mode, follow the steps on page 20 instead.)
Before you begin, make sure you added your printer to the Print Center as
described on the Start Here sheet.
1. From the File menu, select
2. Select your printer from the Format for drop-down list.
3. Select your Paper Size and Orientation.
4. Click to close the Page Setup window.
OK
5. From the File menu select
6. Open the Printer pull-down menu and select your printer again. Always check
to make sure you selected the same printer you chose in the Page Setup
window.
. Select the following settings:
Page Setup
. You see a window like this one:
Print
Select your printer
from the list
Select your Paper Size
Select your document
or image orientation
Select your printer
from the list
Select Print Settings
from the pull down
menu
Printing With Macintosh OS X
17