Villaware NDVLFP1000 Owner's Manual page 5

how To:
cont.
Open the food Chute lid
1 Pull Side Release button out.
2 Pull up the Large Food Pusher.
3 Pull back the food chute lid and
Large Food Pusher.
Before opening Food Chute lid, turn
nOTe:
the unit OFF and unplug the cord.
6
villaware.com villaware.com
Chop
nOTe: make sure the unit is turned OFF
and unplugged before use. Never use hand
to push food into processor. Do not use
the processor continuously for more than 3
minutes at a time.
Lock the bowl onto base. (See "how to
1
assemble the bowl").
2 Grasp the chopping blade by its stem and
slide it onto the center post.
3 Place food into bowl.
Lock cover onto bowl. (See "how to Lock
4
the cover").
5 Lock the Food Chute Lid. (See "how to
Lock the Food Chute Lid").
6 Plug the cord into an electric outlet. Use
the Food Guide to prepare food for
chopping.
Turn the knob to the ON position for
7
continuous processing or the PULSE
position for short processing tasks. When
using the PULSE setting, hold the knob in
the PULSE position for about 2-3 seconds
at a time, check results and repeat if
desired.
8 When finished processing, release the
knob, or if you were using continuous ON,
turn the knob to the OFF position and
allow the chopping blade to stop rotating.
Twist the cover towards the UNLOCk
9
mark to remove lid.
hold the Chopping Blade by its stem and
10
remove. Unlock the bowl by turning it
clockwise towards the UNLOCk mark,
and lift off. Empty the processed food.
nOTe: Chopping Blade is very sharp, use
caution when handling.
Knead Dough
NEVER TRy TO PROCESS
nOTe:
DOUGh ThAT IS TOO STIFF TO kNEAD
COmFORTABLy By hAND.
nOTe: make sure the unit is turned OFF
and unplugged before use. Never use hand
to push food into processor. Do not use
the processor continuously for more than 3
minutes at a time.
1 Lock the bowl onto base.
(See "how to assemble the bowl").
Grasp the dough blade by its stem
2
and slide it onto the center post.
3 Place all the dry ingredients into
the bowl.
4 Lock cover onto bowl.
(See "how to Lock the cover").
5 Lock the Food Chute Lid.
(See "how to Lock the Food Chute Lid").
6 Plug the cord into an electric outlet.
7 Turn the knob to the ON position for
continuous processing or the PULSE
position for short processing tasks. When
using the PULSE setting, hold the knob in
the PULSE position for about 2-3 seconds
at a time, check results and repeat if
desired.
nOTe: All liquid ingredients should be
added through the food chute while unit
is processing. Add liquid in a slow, steady
stream for even distribution. It is important
to add enough liquid to make the dough soft
enough to knead. kneading dough that is too
stiff can strain the machine.
8 When finished processing, release the
knob, or if you were using continuous ON,
turn the knob to the OFF position and
allow the dough blade to stop rotating.
Twist the cover towards the UNLOCk
9
mark to remove.
hold the dough blade by its stem and
10
remove. Unlock the bowl by turning it
clockwise towards the UNLOCk mark,
and lift off. Empty the processed food.
villaware.com villaware.com
7