Villaware BLVLLAZ05H Instruction Manual page 8

after using your blender
Before cleaning and storing your blender, follow the instructions below to disassemble the
jar assembly:
• Turn blender off "O" and unplug it from the electrical outlet.
• Lift jar assembly straight up and remove it from the motor base.
• Remove the lid and empty jar. If necessary, use a rubber spatula
to scrape foods away from the sides of the jar.
• Turn jar assembly upside down and place in sink to allow residue to
drain.
• unscrew threaded bottom cap by twisting counter clockwise and
remove (Figure 1 2).
• Remove jar skirt.
• Grip blade assembly near blades pointing to base. Tilt blade assembly
to remove (Figure 13).
NOTE: Blades may drag along side of jar.
• Remove sealing ring from around blade assembly.
BLADES ARE EXTREMELY SHARP. HANDLE CAREFULLY.
cleaning
• Turn blender off "O" and unplug it from the electrical outlet.
• Disassemble the jar assembly using the instructions in the "after using your blender"
section. All parts of the jar assembly, except the jar skirt, are dishwasher safe. The glass
jar, blade assembly and threaded bottom cap should be placed on the top shelf of the
dishwasher. Place the sealing ring in the bottom basket of the dishwasher. These parts can
also be washed in warm, soapy water. Rinse and dry well.
• Wipe the motor base and jar skirt with a damp or dry cloth.
• Do not immerse the motor base in water or any other liquid.
• Follow the instructions from the "before using your blender" section to assemble the jar unit.
storing
• Always reassemble the jar unit for storage.
• Leave the lid open a gap so no odours are retained.
WARNING: NEVER PuT THE JAR, OR ANY OTHER PART, IN A MICROWAVE OVEN.
NEVER STORE FOOD OR DRINK IN THE JAR.
7
Figure 12
Figure 13