Birmy Graphics PowerRIP Stylus Pro XL Installation And Operation Manual page 11

6. The program will then ask you to choose the
drive and directory you want PowerRlP to be
installed on. The default is C:\PowerRIP. You
may leave the default directory or change it if
desired and then click NEXT.
Note: If you choose not to install PowerRlP at
this time, click CANCEL to stop the installation.
7. The program continues installing, asking you for
Disk 2, then Disk 3, and finally Disk 4. Click on
OK after inserting each disk. (If you are not
loading from the drive displayed, you need to
enter a new path before selecting OK.)
Birmy Graphics Corporation
7