Installing The Software - Birmy Graphics PowerRIP Stylus Pro XL Installation And Operation Manual

Installing the Software

Before installing PowerRIP, make backup copies of all
the installation disks. There is no copy protection on the
disks. You will be required to register PowerRlP and
obtain the unlock code for your copy PoweRlP after
installation.
If your system does not meet the minimum hardware and
software requirements, PowerRlP will not work correctly.
PowerRIP Installer automatically loads the following
32 Bit (WIN32S) Windows libraries if not
l
already loaded
PowerRlP software
l
User manually installs
PowerRIP Windows Printer Drivers
l
To install PowerRIP
1. Turn on the computer and start Windows.
2. Insert the floppy disk labeled PowerRlP
Disk 1 into the floppy drive (either A or B).
3. From the Windows 3.11 Program Manager, select
File, then Run. (For Windows 95 instructions see
the note on the next page.)
Birmy Graphics Corporation