Before Use - Villaware NDVLCB0100 Owner's Manual

Before Use:

Remove all packaging materials and
any promotional labels or stickers
from your Blender.
Be sure all parts (listed under Features)
of your new appliance have been
included before discarding any
packaging materials. You may want
to keep the box and packing
materials for use at a later date.
Before using your VillaWare® Blender
for the first time, remove any dust
from shipping by wiping the base,
cover, and controls with a damp cloth.
4
villaware.com villaware.com
how To:
Jar Assembly
Turn jar upside
1
down so the
small opening
is at the top.
2 Place sealing
ring over jar
opening.
3 Place blade
into jar.
4 Place threaded jar nut over blade and
jar. Place the threaded jar nut on jar
and turn it clockwise to tighten.
5 Place jar assembly
onto base.
6 Place ingredients into jar according
to your recipe. For best results always
add liquids first when blending.
7 Place lid on jar.
8 make sure knob is pointing to OFF
position, then plug the power cord
into a 120 Volt AC electrical outlet.
Note: Avoid contact with blades and
moveable parts.
Speed Modes
• To blend
OFF
PULSE
in high
Speed, dial
Control knob
clockwise to
the farthest
setting.
• To blend
in medium
Speed, dial Control knob clockwise
halfway through the speed selection.
• To blend in Low Speed, dial Control
knob clockwise ¼ of the way through
the speed selection.
• To Stop blending, turn left to "OFF".
The motor will come to a stop.
• You can move between speeds at any
time while blending by turning the
Control knob left or right. The new
speed will start without interruption.
• Turn Control knob counterclockwise
to the "PULSE" setting will give a
momentary pulse at high speed. The
motor will then stop when released.
to Use the Pulse Setting
The "PULSE" setting momentarily
activates the blender at hIGh speed.
You may also continuously move the
Control knob to "PULSE".
• To pulse, turn the Control knob
counterclockwise to "PULSE" to
activate a momentary high speed.
The blender will run at high speed as
long as you hold the knob. The motor
will stop when you release the knob.
Tips: Tips:
• Put liquids in the jar first, unless a
recipe says otherwise.
• Crushing ice: Crush approximately
3 cups of ice at a time with 2 cups
of liquid for optimal results.
• Do not remove the lid while in use.
Remove filler cap to add smaller
ingredients.
• This blender has been designed to
gently process foods when operating
at low speeds. If blades do not rotate
during operation, simply choose a
higher speed.
villaware.com villaware.com
5