Table of Contents
Advertisement
Security Settings
801-Enter New Activation Code
Activation codes enable protection of a leased system from non-payment by
stopping playback if payments have not been met. If the jukebox requires
activating this is where the activation code will be inputted. Units that are not
leased are supplied permanently activated.
810-Set General Admin Access Code
Sets the access code for general administration (Default is 1000)
811-Set Master Admin Access Code
Sets the access code for master administration (Default is 9000)
820-Allow Admin Access From Touch Pad or Touch Screen
If this item is set, it is possible to open the Administration Code Entry window from
user mode without using the remote control. It is still necessary to enter the valid
code. This function can help gain access to administration functions if the remote
control is broken or forgotten.
To access the Administration Code Entry window using a touch pad press the
following combination of touch pads in sequence: RIGHT, LEFT , RIGHT, LEFT ,
UP, RIGHT, UP.
To access the Administration Code Entry window using a touch screen touch the
screen near the bottom left and right corners in the following sequence: Left, Left,
Right, Right, Left, Right.
850-Set Security Code
Sets the system security code. (Default is 1234) Warning: changing the security
code may cause malfunction. If the security code is forgotten it may be required to
return the system back to your supplier to have it reset.
860-General Administration Options
This item allows you to choose which items will appear in the general
administration area.
Special Functions
998-Switch Off System
Shutdown the jukebox without the remote control.
999-Load Factory Defaults
Restores all settings back to factory defaults.
2330 - SCORPION OPERATOR MANUAL
ADMINISTRATION
27
27
Advertisement
Table of Contents
