Epson P320A Printer Basics Manual page 47

You see wrong or missing colors.
I
Make sure the Ink option is set to
for color images and your
Color
software is set for color printing.
I
The print head nozzles may need
cleaning; see page 25 for
instructions.
I
The ink cartridges may be old or low
on ink. To replace an ink cartridge,
see page 27.
I
Try turning off PhotoEnhance. Also
check if you're using a special effect
that alters image colors, like Sepia.
I
Try using Automatic mode. See
page 11 (Windows) or page 14
(Macintosh) for instructions.
I
Try changing the
the Advanced window; see page 17
for information about Advanced
settings.
I
Your printed colors can never exactly
match your on-screen colors.
However, you can use a color
management system to get as close as
possible. Try using the ICM
(Windows) or ColorSync
(Macintosh) setting.
setting in
Gamma
Your printout is grainy.
I
Try using a higher quality paper.
I
Select a higher Print Quality
(resolution) setting. See page 17 for
instructions.
I
Run the Print Head Alignment
utility. See page 32 for instructions.
I
You may need to increase the
image resolution or print it in a
smaller size; see your software
documentation.
Solving Problems
43