Gigabyte GA-EP43T-USB3 User Manual page 24

7) IDE (IDE Connector)
The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach-
ing the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices,
remember to set the jumpers and the cabling according to the role of the IDE devices (for example,
master or slave). (For information about configuring master/slave settings for the IDE devices, read the
instructions from the device manufacturers.)
8) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors)
The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.
Each SATA connector supports a single SATA device.
Hardware Installation
39
40
SATA2_3 SATA2_0
7 1 7
SATA2_4 SATA2_1
7 1 7
SATA2_5 SATA2_2
7 1 7
- 24 -
Pin No.
1
2
1
3
4
1
5
6
7
1
Please connect the L-shaped end of
the SATA 3Gb/s cable to your SATA
hard drive.
1
2
Definition
GND
TXP
TXN
GND
RXN
RXP
GND