Tricity Bendix SG211X Instruction Book page 21

The cooker is supplied with a 3 core flexible
supply cord incorporating a 13amp plug fitted. In
the event of having to change the fuse, a 13amp
ASTA approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any
reason, the wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow
Blue
Brown
-
Connect the green and yellow (earth) wire to
the terminal in the plug, which is marked
with the letter 'E' or the earth symbol
coloured green and yellow.
-
Connect the blue (neutral) wire to the
terminal in the plug, which is marked with
the letter 'N' or coloured black.
-
Connect the brown (live) wire to the terminal
in the plug, which is marked with the letter 'L'
or coloured red.
NOTE: The earth wire should be about 2 cm
longer than the live and neutral wires.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must
be secure over the outer sheath.
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safety.
- Earth
- Neutral
- Live
Before connecting check that:
• The plug used for connection is
easily
appliance is installed.
or
Permanent Connection
In the case of a permanent connection, it is
necessary that you install a double pole switch
between the cooker and the electricity supply
(mains), with a minimum gap of 3mm, between
the switch contacts and of a type suitable for
the required load in compliance with the
current electric regulations.
The switch must not break the yellow and
green earth cable at any point.
Ensure that the cooker supply cord does
not come into contact with surfaces with
temperatures higher than 50 deg. C.
accessible when the
21