Ascii Code: Esc Decimal: Hexadecimal: Comments; Word Processing - Epson FX-286e User Manual

ESC -
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
1: Mode is turned ON.
0: Mode is turned OFF.
This mode provides continuous underlining, including spaces.

Word Processing

ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full or when one of the following is
received: CR, VT, LF, FE The commands HT and BS are invalid
except in n = 0 mode. For n = 3 there must be no carriage returns
within a paragraph. Justification can be used in NLQ only, not draft.
A - 2 8
Turn Underlining Mode On/Off
ESC -
27 45
1B
2 D
(The
can also be used.)
a
ESC
27 97
61
1 B
n
n
n
characters
"0" and "1"
n
n
n
Command Summary
NLQ Justification