The setting is reset without the resetting operation.
• Tile battery
pack was removed
when tile power switch
was set to ON. When
removing
the battery pack, make sure the camera is turned off and the
access lamp is not ilhnninated
(pages
17, 36).
The camera does not work properly.
• Turn off the camera. Remove
the battery
pack and insert it again. If an AC
Adaptor
(sold separately)
is used, disconnect
the power cord. If the camera
is hot, allow it to cool down belbre trying this corrective
procedure.
If the
camera does not work after doing these solutions,
consult
your Sony dealer
or local authorized
Sony service t?tcility.
The five bars of the SteadyShot scale flashes.
• The SteadyShot
function
does not work. You can continue
to shoot but the
SteadyShot
function
will not work. Turn the camera
off and on. If the
SteadyShot
scale continues
to flash, consult
your Sony dealer or local
authorized
Sony service facility.
"--E-"
is indicated on the screen.
• Remo_.e the memory
card, and insert it again. If this procedure
does not turn
off the indication,
t_rmat the memory
card.
161