Advertisement
Selecting
an output
signal
(INPUT/
OUTPUT)
You can select an output signal from the SELECT OUT
jacks at the rear of the projection
TV.
TV/VIDEO
_
cz)
(z)
@®®
®®®
®®®
o®0
MENU
Joystick
1
2
3
Press MENU.
Press the joystick
up or down
to select
INPUT/OUTPUT
and
click the joystick.
f
&
I_
2
OUT
[] VIDEO
LA
[ LF-_J
Use(,;IR_U_N @.. E xil
Select MONITOR
OUT, EDIT OUT or TV OUT.
Select
MONITOR
OUT
EDIT OUT
TV OUT
To
Output the signal of the picture
displayed on the projection TV screen.
Use this option to edit tapes while
monitoring.
Output the signal input to the
projection TV regardless of the
displayed picture on the screen.
Use this option to edit tapes while
watching an input image different
from that being recorded.
Output the TV signal.
Use this option when you connect an
AV receiver to the VIDEO 1 IN jacks.
To select MONITOR OUT:
(1) Make sure the cursor is beside lvlONITOR OUT
and click the joystick.
(2) Press TV/VIDEO
to select the input to the
projection
TV and ,:lick the joystick.
TVNIDEO
To select
EDIT OUT:
(1) Press the joystick up or down to select EDIT
OUT and click the joystick.
(2) Press the joystick up or down to select the input
to be edited and click the joystick.
f
//'f_
&
II_IDEO 1
OUT
_,o,_o
_ _l
Use ,_RE UBN@Ex_
To select TV OUT:
(1) Press the joystick up or down to select TV OUT
and click the joystick.
"Set up using only VIDEO1 input?" appears.
t
&
I _1
IN
OUT
[ LI¢_
Use (!:' RETURN@ Exil
(2) If you connect only an AV receiver to your
proiection
TV, press the joystick up or down to
select YES. Then clSck the joystick.
You can
ahvays select the signal from the receiver by
pressing
TV/VIDEO
once.
If you connect your audio/video
equipment
to
the projection
TV, ,,;elect NO. Yeu can select any
of the VIDEO 1 to VIDEO 5 inputs with the TV/
VIDEO button.
Notes
)
)
T
• When you set INI UTiOUTI
UT to T_ OUT, you cannot
swap
the main/:right
and window/left
pictures.
• The SELECT OUT signal
is cnly available
when
the projection
TV is on.
-29-EN
Advertisement
