Turning Off The Power; Selecting The Wide Screen Mode; Projector; Screen - Sony BRAVIA HDMI VPL-AW15 Operating Instructions Manual

1
Press the I/(_ (On/standby) switch.
A message "POWER OFF'?" appears on the screen.
2
Press the I/_ (On/standby) switch again before the message disappears.
The I/(_ (On/standby) indicator flashes in green and the fall continues to run to reduce the
internal heat. First, the I/(_ (On/standby) indicator flashes quickly, during which you will
not be able to light up the I/(_ (On/standby) indicator with the I/(_ (On/standby) switch.
3
Confirm that the fan stops running and the I/_ (On/standby) indicator
lights in red.
You can turn off the projector by holding the I/(,D(Ou/staudby) switch for about l second,
instead of performing the above steps.
Selecting the Wide Screen Mode
You can enjoy various wide screen modes accordiug to the video signal received.
Press WIDE MODE.
WIDE MODE --
button
REAL COLOB PBOCESSlNG
Each time you press the button, you can
change the "Wide Mode" setting in turn.
You can also select it using the menu. (_
page 44)
* RCP butlon: VPL-AWI5 only
28