Selecting The Component; Listening To Nmlti Channel Sound; Multi Ch In - Sony STR-DB790 Operating Instructions Manual

Rotate INPUT SELECTOR to select the
input.
The selected input appears in the display.
To select the Display
VCR VIDEO 1 or
VIDEO 2
Camcorder or TV game VIDEO 3
DVD player DVD
Satellite timer TViSAT
MD or tape deck MDiTAPE
CD or Super Audio CD CDiSACD
player
Built-in i ::ne: (FM) Tune: (FM)
Built-in r une:(AM) Tune: (AM)
Turntable PHONO
2
3
To
Turn on the component and start
playback.
Rotate MASTER VOLUME -/+ to adjust
the volume.
mute the sound
Press MUTING on the remote.
Notes on using headphones
• When headphones
are connected, you can select only
the tbllowmg sound fields (page 33)
HEADPHONE (2CH)
HEADPHONE THEATER
• When headphones are coimected and you use the
MULTI CH IN fimction (see "Listening to nmlti
cha:mel somld"), the sound of all channels may not
output depending on the speaker settings
-- MULTI CH IN
You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This enables you to enjoy high quality
analog inputs like DVD or Super Audio CD.
Also see "D.PWR." (page 39).
Surround effects are not activated when using
this input.
STR-DA1 OOOES
Move the easy scroll key on the remote to
select "MULTI CH', then press the key to
enter the selection.
STR-DB790
Press MULTI CH on the remote.
When a center speaker or sub
woofer is not connected
If you have set the center speaker to "NO" or
"MIX", or set the sub woofer to "NO" in the SP
SETUP menu (page 20), and you activate the
MULTI CH IN flmction, the analog center or
sub woofer audio will be output from the front
left and right speakers.
24 GB