Sony HT-CT150 Operating Instructions Manual page 7

Installing the speaker on a wall
You can install the speaker
on the wall.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a wall beam. Install the speaker on a vertical and flat reint_rced area of the wall.
• Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety
during the installation.
• Sony is not responsible for accktents or damage caused by improper installation, insufficient wall strength,
improper screw installation or natural calamity, etc.
1 Prepare screws (not supplied) that are suitable for the holes on the back of the speaker.
See the illustrations below.
.................
4mm
more than 25 mm
-I
ID
I'D
2
Hole on the back of the speaker
Fasten the screws to the wall. The screws should protrude 6 to 7 ram.
265 mm
3
Hang the speaker onto the screws.
Align the holes on the back of the speaker to the screws, then hang the speaker onto the two screws.
7GB