Troubleshooting Problems And Remedies - Sony CMT-GP5 Operating Instructions Manual

Should you encounter a problem with your
system, de the following:
1
Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
if the problem persists after doing all of the
above, consult your nearest Sony dealer.
When the I/_) indicator flashes
hnmediately unplug the power cord and check
the following items.
• Is the voltage selector set to the correct
voltage?
Check the voltage for your region, then make
sure the voltage selector is set correctly.
• Arethe+and speakercordsshort-circuited?
• Are you using only the prescribed speakers?
• Is anything blocking the ventilation holes on
the rear of the system?
After checking Ihe above items and fixing any
problems, connect the power cord again and turn
on the system. If the indicator still flashes, or if
the cause of the problem cannot be lbund even
after checking all the above items, consult your
nearest Sony dealer.
General
The display or button remains lighted or
flashes even after the system was turned off.
• Press DI SPLAY repeatedly until tile clock display
appears.
The clock indication does not show the
correct time.
• A power interruplion has occurred. Set the clock
(page 5) and timer settings (pages 14 and 15)
again.
The clock setting/radio presetting/timer is
canceled.
• The power cord is disconnected or a power Pailure
occurs longer than halfa day.
Redo the following:
"Setting die clock" (page 5)
"Preseefing radio stalions" (page 8)
If you have set the timer, also redo "Waking up to
music" (page 14) and "Timer recording radio
programs" (page 15).
There is no sound.
• Press VOL _ repeatedly.
• Make sure the headphones are nol connected.
• Insert only the slripped portion of the speaker cord
into the SPEAKERS terminal. Inserting the vinyl
portion of the speaker cord will obstruct the
speaker connections (page 4).
Sound comes from one channel, or
unbalanced left and right volume.
• Check tile speaker connection and speaker
placement.
Sound lacks bass.
• Check that the speaker's _ and lerminals are
connected correctly.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. M eve the stereo system away from the TV
or VCR.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to
the power line.
The timer cannot tie set.
• Set the clock correctly (page 5).
The timer does not function.
• Set the timer correctly (pages 14 and 15).
• Cancel the Sleep Timer funOion (page 13).
• You cannel activate Ihe timer recording and Daily
Timer at the same time.
The remote does not function.
• Remove the obstacle.
• Move the remo_e closer to tile system.
• Point the remote at the system's sensor.
• Replace the balteries (Rd/size AA).
The color irregularity on a TV screen persists.
• Turn oft'the TV set once, then turn it on after 15
to 30 minu_es. If the color irregularity still
persists, place the speaker_ f_rther away from the
TV set
18 G8