Sony Trinitron KV-32S15 Operating Instructions Manual page 10

:For cable box control (Cable Mouse) users
You can set up your TV easily by using the AUTO SET
UP feature. It presets all the receivable channels.
To set up the TV manually, see "Setting cable TV on or
off" (page12) and "Presetting channels"(page12).
If the TV is set to a video input, you cannot execute
AUTO SET UP. Press TV/VIDEO or TV so that a
channel number appears.
(Front of KV-27S15/29RS15/32S 15)
T
SET UP TVNIDEO
©
SET UP VOL+ CH- CH+ POWER
(Front of KV-27V15/32V15)
SET UP TVNIDEO - VOLUME 4- -- CHANNEL 4- ©POWER
_lrtt .... t ..-tI t 1t T--rilL
SET UP VOL+ CH- CH+ POWER
1
Press POWER to turn the TV on.
OPOWER
2
Press SET UP on the front of the TV.
The menu appears.
SET UP
DEMO : VOL+ I
AUTO SET UP OH+ I
FACTO ESET C"- I
3
Press CH +.
-CHANNEL+
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and
the TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed. If the TV
receives cable TV channels, CATV is set to ON
automatically.
Notes
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
• In case of using the AUX connector, press the TV button on the
remote commander first and make sure that "AUX" is
displayed beside the channel number on the screeen. Then
follow steps 2 and 3 above to perform AUTO SET UP. (KV-
32V15 only)
DEMO: To browse the main functions,
Press VOL + in step 3. The functions and menus are
displayed one by one.
FACTORY PRESET: To restore the factory settings
when you are confused about the TV settings,
Press CH- in step 3. The settings of picture and sound
are restored to the factory setting.
Erasing or adding channels
After AUTO SET UP you can erase unnecessary
channels or add the channels you want. Preset channels
during the day rather than late at night, when some
channels may not be broadcasting.
1
ll "E"O
MODE__ RETURN
tow position--+lll _ _ _ |
Press MENU.
The main menu appears.
'VIDEO
AUDIO
SET UP
CAPTION VISION
Use _ Exit
(continued)
10 I
Getting Started