Sony SLT-A37 Instruction Manual page 23

iiiliiiiii
iilii
Attlchil I I ills ii=ii_iii;;iiii;
• Do nol hold the part of the lens thai is exlended for lhe zoonl or t)ctls adjuslment.
To removethe lens
Press tie lens release button
all the way in and turn the
lens counterclockwise until it
stops.
2 Attachthe caps to the front
and rear of the lens and the
bodycap to the camera.
• Before you attach them, remove dust
from them.
• A rear lens cap is not supplied with
the DT 18-55mm F3.5-5.6 SAM Lens
Kit. When you store the lens without
attaching it to the camera, purchase
the Rear Lens Cap ALC-R55.
Lens release button
To attacha lenshood
It is recommended that you use a lens
hood to reduce flare and ensure
maximum image quality.
Fit the hood into the mount on the end of
the lens barrel and rotate the hood
clockwise until it clicks.
Notes
• A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the
ALC-SH 108 (sold separately).
• The lens hood may block the light of the flash. Remove the lens hood when using the
flash.
23