Sony HT-V1000D Guide Manual page 43

SONY
Composite video connections. The most common way of hooking up home video
source components, the composite connection combines black-and-white i_['ormation
(luminance) and color in_brmation (chrominance) into a single signal that's a
"composite" of the two. Composite video connection of source equipment enables far
higher resolution and far better color than RF connection. In home theater equipmenL
the physical connector is the same "RCA" or "pin" plug as used _br line-level audio.
To avoid confusion, the video connectors are typically color-coded yellow. Because
composite video requires a separate connection _br sound, manufacturers often supply
cables with three sets of plugs on each end: Video (yellow), Right Audio (red) and
Left Audio (white).
Composite video connections have the potential to deliver far
higher picture quality than RF, unencumbered by sound.
S-Video connections. S-Video connections can deliver somewhat higher quality
than composite video, because they offer separate conductors ]br a black-and-white
signal (luminance) and a color signal (chrominance). The physical connector is a 4-
pin Mini-DIN plug.
S-Video connections can be better than composite video
because they provide separate signal paths for the black-and-
white and color signals.
YiPdPa component video connections. These connections are a must _br
progressive scan DVD_and they're highly desirable _br other equipment. They
divide the video signal into three component parts: black-and-white luminance (¥),
blue color difference (Pld and red color difference (Pl0. This enables beautifully rich,
clear, accurate color, especially important _br today's better video sources. In home
The Sony Guide 1:oHome Theal:or 43