Table of Contents
Advertisement
Expansion Slots
The motherboard contains four expansion slots, including one PCI Express x16 slot,
one PCI Express x1 slot and two PCI slots.
PCI Express x16 Slot-PCIEX16
There is one PCI Express x16 slot reserved for graphics or video cards. The PCIe x16 slot is
complianting with PCIE 2.0 specification.
PCI Express x1 Slot-PCIEX1
There is one PCI Express x1 slot that is designed to accommodate less bandwidth intensive
cards, such as a modem or LAN card.
PCI Slots-PCI1~2
The two PCI slots support many expansion cards such as a LAN card, USB card, SCSI card and
other cards that comply with PCI specifications.
Jumper Settings
This section explains how to configure the motherboard's hardware. Before using
your computer, make sure all jumpers and DRAM modules are set correctly. Refer to
this section whenever in doubt.
CMOS Clear Jumper-JP1
JP1
1-2* Normal*
1
2-3
CMOS Clear
1
Close
Open
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen
even if the frequency multiplier setting in CMOS setup is changed.
PCIEX16
PCIEX1
PCI2
PCI1
Selection
* = Default setting.
240
120
240
120
115XLM
REMOVE
121
121
Hardware Installation
17
Advertisement
Table of Contents
