Casio Exilim EX-Z2000 User Manual page 93

Your digital camera comes with anumber ofextracted sample subjects initsbuilt-in
memory. You can use these s ample subjects topractice creating Dynamic Photo
images byinserting them into your original snapshots ormovies.
.
Remove the memory card from the camera
(if one is loaded).
You will not be able to access the extracted sample
subjects in built-in camera memory while a memory
card is loaded in the camera.
2. In the REC mode, compose the image and press
the shutter button to shoot a standard
snapshot.
You will insert the extracted sample subject into the
snapshot you shoot here.
1. Press [r_l] to enter the PLAY mode.
2. Perform the following operation on the camera
[MENU] ---_ PLAY tab ---_ "Dynamic Photo".
3. Use [,] and [_.] to select the snapshot you shot
in Step 1 above, and then press [SET].
.
.
Use [,] and [_.] to select the extracted sample subject in built-in
camera memory that you want to insert into the image and then press
[SET].
Use the zoom controller to adjust the size of the
subject and use [A], [V], [_], and [_.] to adjust
its position. When everything is the way you
want, press [SET].
This inserts the extracted sample subject into another
image and creates a Dynamic Photo image.
3 Using the Dynamic Photo Extracted Sample Subjects